Online Electronics
WAGO » Electronics » Series 859 » WAGO 859-730

WAGO 859-730

859-730 WAGO 859-730

WAGO 859-730
Part # 859-730
Manufacturer WAGO
Condition New
Price: $ 54.54

Please Contact Us for Stock Availability

Qty
Order by 3PM MST (subject to stock availability) same day shipping available!
OPTOC 6MM 24/3-30VDC 3A 2LEITER
Got questions? Send us a message or call us at 1-800-335-5111 for additional assistance.
Optocoupler terminal block

Features

Approvals

  • Underwriters Laboratories Inc., UL, E198726, ANSI/ISA 12.12.01
  • CQST/CNEx, CCCEx, 2021312304000982, CNCA-C23-01
  • UL International Netherlands B.V., UL, E175199 Sec.4, UL 508

Specifications

Notes

  • Note: Optocouplers and solid state relays are designed for use in signal processing networks, which are not supplied by the low-voltage power supply networks.

Control Circuit

  • Nominal input voltage UN: DC 24 V
  • Input voltage range (low level): DC 0 … 7.5 V
  • Input voltage range (high level): DC 12.5 … 30 V
  • Nominal input current at UN: 15 mA

Load Circuit

  • Circuit type: 2-wire connection
  • Limiting continuous current: 4.8 A
  • Peak output current: 25 A
  • Nominal output voltage: DC 24 V
  • Output voltage range: DC 3 … 30 V
  • Voltage drop at output (max.): ≤ DC 0.4 V
  • Leakage current at rated voltage: ≤ 45 µA
  • Turn-on time: ≤ 20 µs
  • Turn-off time: ≤ 1 ms
  • Rise time (t10-90): 12 µs
  • Drop-out time (t10-90): 15 µs
  • Switching frequency: ≤ 2.3 kHz

Signaling

  • Status indicator: Yellow LED

Safety And Protection

  • Rated voltage: 300 V
  • Overvoltage category: II
  • Pollution degree: 2
  • Dielectric strength, control/load circuit (AC, 1 min): 2.5 kVrms
  • Insulation type (control/load circuit): Basic insulation
  • Insulation type (between adjacent devices of the the same type): Reinforced insulation (safe isolation)
  • Insulation type (to any type of adjacent devices): Basic insulation
  • Protection type: IP20
  • Note on protection type: When mated or with end plate 859-525

Connection Data

  • Connection technology: CAGE CLAMP®
  • Solid conductor: 0.2 … 2.5 mm² / 24 … 14 AWG
  • Fine-stranded conductor: 0.2 … 2.5 mm² / 24 … 14 AWG
  • Fine-stranded conductor; with insulated ferrule: 0.2 … 1.5 mm² / 24 … 14 AWG
  • Fine-stranded conductor; with uninsulated ferrule: 0.2 … 1.5 mm² / 24 … 14 AWG
  • Strip length: 5 … 6 mm / 0.2 … 0.24 inch

Physical Data

  • Width: 6 mm / 0.236 inch
  • Height: 91 mm / 3.583 inch
  • Depth from upper edge of DIN-rail: 56 mm / 2.205 inch

Mechanical Data

  • Mounting type: DIN-35 rail

Material Data

  • Color: Gray
  • Fire load: 0.313 MJ
  • Weight: 18.468 g

Environmental Requirements

  • Surrounding air temperature (operation at UN): -40 … 70 °C
  • Surrounding air (operating) temperature for UL: -40 … 40 °C
  • Surrounding air temperature (storage): -25 … 70 °C
  • Processing temperature: -25 … +50 °C
  • Relative humidity: 5 … 95 % (non-condensing)
  • Operating altitude (max.): 2000 m

Standards And Specifications

  • Standards/Specifications: EN 61010-2-201 || EN 61000-6-2 || EN 61000-6-3 || UL 508

Commercial Data

  • Packaging type: Box
  • Country of origin Sales Organisation Germany: CN
  • GTIN: 4055143604987
  • Customs tariff number Sales Organisation Germany: 85365005000
: *
: *
: *
 
 

Copyright © 2004- by On-Line Electronics, Inc., All Rights Reserved - Developed by EngNet - Shipping & Returns  |  Terms & Conditions  |  Privacy Policy